1ST playing cards

How to Store 1ST Edition Brick Boxes for Long-Term Care

How to Store 1ST Edition Brick Boxes for Long-Term Care

By 1ST playing cards | Published: 2026-10-20

Category: Tips & Care

Proper storage keeps your 1ST Edition brick boxes and their decks in top condition. Learn the key steps to protect the box, cards, and any signed deck inside.

Quick Answer

Store your 1ST Edition brick boxes in a cool, dry place away from sunlight, with the box upright and sealed if possible. This preserves the integrity of the box and the decks inside.

Why Brick Box Care Matters

A brick box is more than a container—it's a display piece and a protective case for 12 decks. The 1ST Edition Bicycle Rider Backs brick boxes, for example, feature classic designs that collectors prize. The 1ST Holo Edition brick box even includes a signed deck under cellophane, so protecting that signature is part of the care.

Neglecting storage can lead to crushed corners, faded artwork, or warped cards. The steps below help you avoid these common issues without overcomplicating the process.

Steps to Store Your Brick Box

  1. Choose a Stable Environment: Keep the brick box in a room with consistent temperature (60-75°F / 15-24°C) and low humidity (40-60%). Avoid basements, attics, or near windows where temperature swings and moisture can warp the cardboard or cause cards to stick. Common mistake: storing boxes in a garage or near a radiator. Even a few days of heat or damp can damage the box.
  2. Store the Box Upright: Place the brick box on its bottom edge, like a book on a shelf. Stacking boxes horizontally can crush the bottom decks or deform the box over time. If you must stack, limit to two boxes and place a flat board between them. Checkpoint: after a month, inspect the box for any bowing or corner damage.
  3. Keep the Original Wrap or Seal Intact: If you haven't opened the box, leave the factory seal in place—it adds a layer of protection against dust and moisture. For opened boxes, reseal with acid-free tape or store inside a clear archival bag. Common mistake: removing the cellophane from boxes like the 1ST Holo Edition brick box, which exposes the signature to air and handling.
  4. Avoid Direct Sunlight and Fluorescent Light: UV rays fade the ink on the box and cards over time. Display the box on a shelf away from windows or use UV-protective glass if you want it visible. Even indirect sun through curtains can cause gradual fading. Checkpoint: rotate the box every few months if it's on display to even out any light exposure.
  5. Handle with Clean, Dry Hands: Oils and dirt from fingers can stain the box surface. When moving or inspecting the box, wash and dry your hands first. For the signed deck inside the 1ST Holo Edition brick box, never touch the cellophane directly—the oils can cloud it. Common mistake: using lotion before handling. Even residue-free lotion leaves a film that attracts dust.

Products Referenced

  • 1ST Edition Bicycle Rider Backs Brick Box In Red: 1ST Edition Bicycle Rider Backs Brick Box In Red is a box of 12 decks, first collaboration with Bicycle Rider Backs. The iconic back design and limited release make this box a collector's item that benefits from careful storage to preserve its value.
    1ST Edition Bicycle Rider Backs Brick Box In Red
    1ST Edition Bicycle Rider Backs Brick Box In Red
  • 1ST Holo Edition Brick Box *NOT GILDED*: 1ST Holo Edition Brick Box includes a signed deck with the autograph under cellophane. The signature is protected from wear, but the box still needs stable conditions to prevent the cellophane from peeling or the box from denting.
    1ST Holo Edition Brick Box *NOT GILDED*
    1ST Holo Edition Brick Box *NOT GILDED*

Shop Related Products

1ST Edition Bicycle Rider Backs Brick Box In Red

1ST Edition Bicycle Rider Backs Brick Box In Red

$131.40 $180.00

Shop Now
1ST Holo Edition Brick Box *NOT GILDED*

1ST Holo Edition Brick Box *NOT GILDED*

$158.40 $240.00

Shop Now